Programme

QIRT 2024 Journal

QIRT-2024-003
Increasing the effective sampling rate of thermographic imaging for thermal transient analysis
S. H. Anke, N. J. Ziegeler, P. W. Nolte, S. Schweizer
https://doi.org/10.21611/qirt-2024-003

QIRT-2024-012
MWIR camera calibration for CO2 quantification
V. F. Paes, J. N. Rosa, R. A. M. Ferreira, M. P. Porto
https://doi.org/10.21611/qirt-2024-012

QIRT-2024-018
Robust Temperature Measurement in Dynamic Environments through Detection and Tracking
R. Usamentiaga, P. Venegas, S. Sfarra, H. Zhang
https://doi.org/10.21611/qirt-2024-018

QIRT-2024-020
Three-dimensional convolution assisted thermal image enhancement for defect detection in composite materials
F. Wang, Z. Jiang, J. Jiang, Y. Yao, Y. Liu
Soon

QIRT-2024-022
Preliminary Assessment of the Health Status of Patients with Parkinson’s Disease by means of InfraRed Thermography
A. Cannuli, P. De Meo, F. Freni, A. Quattrocchi, M. Valenti, A. Venuto, R. Montanini
Soon

QIRT-2024-026
New compensation method for Lock-in thermography to eliminate lateral heat flux
J. Hufert, J. Rittmann, M. Kreutzbruck
Soon

QIRT-2024-027
Detection of perforators for DIEP flap breast reconstruction using deep learning on thermal images
G. Steenackers, W. Clarys, J. Verstockt, E. Cardenas, F. Thiessen
Soon

QIRT-2024-029
Thermographic investigation of the anisotropic behaviour of additively manufactured AISI316 steel using DED-Arc
R. Krankenhagen, S. Chaudhuri, A. Pittner, R. Winterkorn, R. de Finis, D. Palumbo, U. Galietti
Soon

QIRT-2024-030
Tracking of Car Accident Histories by Discriminating OEM and Repaired Coating Areas through Active Thermography
Y. Kim, J. Jo, B. Kim, H. Kim, H. Sohn
Soon

QIRT-2024-036
Benefits of Digital Twin of Robotized Infrared Flash Thermography for Offline Programming
S. Maillard, C. Dubos, A. Aigueperse, J.-N. Frouart and B. Bazin
Soon

QIRT-2024-039
Infrared thermography for quality control of HMA paving – Zagreb Airport case study
J. Domitrović, B. Milovanović, T. Rukavina
Soon

QIRT-2024-040
Automatic detection based on Deep Learning of small cracks in induction thermography using images from FEM Simulation Models
O. Antero, A. Muniategui, E. Gorostegui-Colinas, A. Gonzalez Conde, B. Oswald-Tranta, P. Westphal
Soon

QIRT-2024-043
Infrared thermography characterization of smart multi-functional materials for the aeronautical industry
P. Venegas, I. Sáez de Ocáriz, M. Blanco, C. Monteserín, J.M. Laza, J.L. Vilas
Soon

QIRT-2024-044
Tensile loading of Ti-25Nb-0.7O shape memory alloy monitored by infrared thermography and digital image correlation
K. M. Golasiński, M. Maj, W. Tasaki, E. A. Pieczyska, H. Y. Kim
Soon

QIRT-2024-052
Improved algorithm for true temperature measurement using dual-wavelength thermography
D. Reichel, A. Grögeder
Soon

QIRT-2024-053
A preliminary study on pipe wall thinning of metallic underground utilities using in-pipe infrared thermography
Samuel Yu, Marco Kin Pan Ho, Wallace Wai-lok Lai, Janet Fung Chu Sham, Ho Chun You
Soon

QIRT-2024-054
Cure monitoring of fibre reinforced composites using infrared imaging and data assimilation
Gernot Mayr, Guenther Mayr, Gerald Zauner
Soon

QIRT-2024-057
Thermal Image-Based Wheel-Rail Contact Classification and Analysis Using Convolutional Neural Networks
M. Słowiński, T. Staśkiewicz
Soon

QIRT-2024-059
Test rig for investigation of innovative Indirect Regenerative Evaporative Cooling technology for electronics using IR thermography
D. Levchenko, R. Olbrycht, M. Kałuża, M. Felczak, P. Kubiak, B. Więcek
Soon

QIRT-2024-061
A novel approach to the realisation of a rail specimen with defined surface cracks in work-hardening manganese steel for the calibration of inductive thermographic measurements
C. Tuschl, B. Oswald-Tranta, D. Künstner, S. Eck
Soon

QIRT-2024-064
Advances in Non-Destructive analysis of biodegradable Mg AZ31 magnesium alloys through pulsed laser thermography
G. Dell’Avvocato, A. Cusanno, P. Bison, S. Rossi, G. Palumbo, G. Ferrarini
Soon

QIRT-2024-065
Inspection of Deep-Seated Fire Within Waste Disposal Site by Infrared Thermography
I. Gabrijel, M. Drakulić, B. Milovanović, I. Banjad Pečur
Soon

QIRT-2024-067
Assessment of indoor microclimate and thermal comfort in buildings: A thermographic approach
G. Ferrarini, P. Bison, A. Bortolin, G. Cadelano and S. Rossi
Soon

QIRT-2024-068
Towards comprehensive quantification: preliminary laser thermography procedure in Probeless Friction Stir Spot (P-FSSW) aluminium welding.
G. Dell’Avvocato, M. Rashkovets, D. Volosevich, N. Contuzzi, D. Palumbo, G. Casalino, U. Galietti
Soon

QIRT-2024-074
Increasing scanning speed during induction thermography tests: simulations and experimental tests to investigate crack detectability.
E. D’Accardi, G. Dell’Avvocato, I.O. Del Rosso, G. Di Franco, U. Galietti, D. Palumbo
Soon

QIRT-2024-075
Anisotropy investigation of a single crystal superalloy using laser-spot infrared thermography
S. K. Kunji Purayil, P. D. Hirsch, J. Lecompagnon
Soon

QIRT-2024-077
Practical study on the thermographic detectability of internal defects using temporally structured laser heating
J. Lecompagnon, M. Ricci, S. Laureti, M. Ziegler
Soon

QIRT-2024-078
Robotic-Assisted 3D Scanning and Laser Thermography for Crack Inspection on Complex Components
P. D. Hirsch, S. K. Kunji Purayil, J. Lecompagnon, N. W. Pech-May and M. Ziegler
Soon

QIRT-2024-084
DPL non-Fourier heat transfer modelling in porous materials and validation using IR measurement
M. Strąkowska, G. De Mey, B. Więcek
Soon

QIRT-2024-086
Measuring wheel-rail wear in real operation using thermal imaging
T. Staśkiewicz, M. Słowiński, K. Grochalski, B. Jakubek, P. Pawłowski
Soon

QIRT-2024-087
Modeling the solar loading thermography inspection of structures with finite elements method
B. Méthot, C. Ibarra-Castanedo, M. Klein, X. PV Maldague
Soon

QIRT-2024-092
Microwave Active Thermography (MIRT) for rebars detection and evaluation in reinforced concrete structures
B. Szymanik, S. A. Keo, F. Brachelet, D. Defer
Soon

QIRT-2024-095
Comparison between the Performance of Pulsed, Pulsed Phase and Pulsed Eddy Current Thermography Modalities Regarding to the Detection of Artificial Defects in CFRP with Machine Learning for Classification
M. Grosso Lima, I. B. C. de Paula, R. M. Cautivo, C. G. Camerini, G. R. Pereira
Soon

QIRT-2024-096
Application of fuzzy logic in isothermal surface boundary determination
H. Glavaš, Č. Livada, D. Jukić, K. Vdovjak
Soon